APX-3666
兼容 CXP-6 Single 6Ch 的 CoaXPress 采集卡

  • 支持 CXP-6 Single 相机，最多可连接 6 个通道。

  • 以单根同轴电缆，进行视频传输和电源控制。

  • 通过前面板上的 LED 指示摄像头状态。

  • 配备 2GB DDR4 内存作为图像缓冲区。

  • 通过编码器信号输入（RS-422）进行视频输入控制。

  • 通用输入/输出端口（TTL 或开集电极）用于与外部设备的接口连接。

  • PCI Express 3.0（Gen3）8GT/s ×8。

Model APX-3666
Interface CoaXPress Rev1.1.1CXP-6 Single (6.25Gbit / s) x6
※ 1 ~ 6 camera connectable ※ Asynchronization available DIN connector
Image input data 8,10,12bit mono / RGB
Camera power Power Over CoaXPress : + 24V (13W) x6
※External power connector(6pin) +12V
Memory DDR3 SO-DIMM 2GB
GP I/O BOX header 40pin connector
TTL input : 8ch
TTL/OP output : 6ch
Isolation input : 6ch
Isolation output : 6ch
RS422 input ：4ch
Event Start image acquisition, DMA end, GPIN, FIFOC, etc.,
FPGA Temperature Monitoring supported
System BUS +12V±8% (PCI Express card edge) +12V ±8%
(PoCXP External power connector 6pin)
Power +12V ± 8 % (External+ 12V connector)
Operation environment Temp. : 0 ℃ ~ 40 ℃, Humidity : 30 ~ 85 % (Non-condensing)
Dimension 167.65mm × 111.15mm Panel width 20mm
OS Windows 10 64bit
Software (Option) SDK-TransFlyer / SDK-AcapLib2
Remark)
– Specification and dimension are subject to change without prior notice.
– Power is not including inrush current.
– For correct product usage, please read the user manual carefully before use and ensure the product is used within the warranty scope.