Frame Grabber

Camera Link

APX-3302MDRA
CL Base 2Ch MDR version Frame Grabber

  • Connect up to 2 Camera Link Base Configuration cameras
  • Compatible with PoCL
  • 2ch synchronous / asynchronous image capture
  • Large capacity onboard memory of 256 M Byte
  • The output for strobe timing corresponds to each camera
  • General purpose I/O ports for external trigger, encoder etc.
  • PCI-Express 2.0 x 4 (Gen 2) compatible
Model APX-3302MDRA
Image input I / F CameraLink Base Configuration 2ch
Two MDR 26 pin connectors installed
Sampling clock 85 MHz (MAX)
Area, line camera compatible
PoCL Correspondence
MEGA-FIFO DDR2-SDRAM 256MB
Image processing Tap Sort + Line Inversion
Sync output Camera control signals: CC1 to CC4
General purpose output: 6ch asynchronous,
TTL / open collector (Available with the strobe timing output)
Sync input External trigger: TTL / open collector / differential signal RS-422
Encoder: differential signal RS-422 (line driver), A / B / Z phase,
1 MHz (MAX)
General purpose input: TTL / open collector
Event 0 ℃ to 50 ℃, humidity: 35% to 85% (no condensation)
System bus PCI Express 2.0 x4 (Gen2) 2.5GT / S
Power + 12V
Environment 0 ℃ to 50 ℃, humidity: 35% to 85% (no condensation)
Dimension 167.65 mm x 111.15 mm Panel width 20 mm(not including Projections)
Supported OS Windows11 64bit/Windows10 64bit
Software (option) SDK-AcapLib2
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty