Leading Company in the industrial Embedded Company market


CXP-6 Single 2ch ~ Dual 1ch Cameras Connectable Frame Grabber

  • Available Configuration :  CXP-6 Dual(1Ch), Single(2Ch)

  • Check the status of the camera with the front panel LED

  • 2 GB of DDR3 memory as image buffer

  • Enables image input control by encoder signal input (RS – 422)

  • Equipped general purpose input / output pin (TTL or open collector) for I / F with external equipment

  • PCI Express 2.0 (Gen2) 5GT/s ×4, and when DMA, 1.6Byte/s can be transmitted

Model APX-3662V2
Image input I / F CoaXPress Rev1.1
CXP-6 Dual (12.5Gbit / s) x1
CXP-6 Single (6.25Gbit / s) x2 ※ 1 ~ 2 cameras ※ Asynchronous
DIN 1.0 / 2.3 2ea equipped (Arranged at 9mm interval)
Image input format 8,10,12bit Mono / RGB 8, 10bit
Camera power output Power Over CoaXPress : + 24V (13W) x4
※ +24V voltage is generated within board
Encoder RS-422 (Line driver)
Phase-A , B,  Z 1MHz (MAX)
32bit counter and 32bit / 16bit compare register, one pair each installed
(Image input trigger with comparison register match)
General Purpose I / O GP input : 8ch (TTL)
GP output : 6ch (TTL / Open collector)
Isolation input × 6ch, Isolation output × 6ch
RS-422 input : 4ch (Compatible with shaft encoder 3ch)
Interrupt Image grab start, DMA end GPIN, etc,
System BUS PCI Express 2.0 (Gen2) × 4 (5.0GT / S)
Power + 12V ± 8 %
Operating environment Temp : 0 ℃ ~ 50 ℃, Humidity : 35 ~ 85 % (Non-condensing)
Dimension 167.65mm x 111.15mm (Excluding connector)
Weight 200g
Support OS Windows 7/10 (32bit / 64bit)
SDK (Option) SDK-TransFlyer / SDK-AcapLib2
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.