APX-3666
CXP-6 Single 6Ch Compatible CoaXPress Frame Grabber

  • Supports CXP-6 Single, capable up to 6ch.

  • Video transmission and power control with x1 coaxial cable.

  • Front panel LED for camera status indication.

  • 2GB DDR4 memory as an image buffer.

  • Video input control via encoder signal input (RS-422).

  • Universal input/output ports (TTL or open collector) for interfacing with external devices.

  • PCI Express 3.0 (Gen3) 8GT/s ×8

Model APX-3666
Interface CoaXPress Rev1.1.1CXP-6 Single (6.25Gbit / s) x6
※ 1 ~ 6 camera connectable ※ Asynchronization available DIN connector
Image input data 8,10,12bit mono / RGB
Camera power Power Over CoaXPress : + 24V (13W) x6
※External power connector(6pin) +12V
Memory DDR3 SO-DIMM 2GB
GP I/O BOX header 40pin connector
TTL input : 8ch
TTL/OP output : 6ch
Isolation input : 6ch
Isolation output : 6ch
RS422 input ：4ch
Event Start image acquisition, DMA end, GPIN, FIFOC, etc.,
FPGA Temperature Monitoring supported
System BUS +12V±8% (PCI Express card edge) +12V ±8%
(PoCXP External power connector 6pin)
Power +12V ± 8 % (External+ 12V connector)
Operation environment Temp. : 0 ℃ ~ 40 ℃, Humidity : 30 ~ 85 % (Non-condensing)
Dimension 167.65mm × 111.15mm Panel width 20mm
OS Windows 10 64bit
Software (Option) SDK-TransFlyer / SDK-AcapLib2
Remark)
– Specification and dimension are subject to change without prior notice.
– Power is not including inrush current.
– For correct product usage, please read the user manual carefully before use and ensure the product is used within the warranty scope.