APX-3664G3A-FL
Fan-less CXP-6 Quad x1, Single/Dual x2 Frame Grabber

  • Supports CXP-6 Quad camera input, up to 25Gbit/s x4 coaxial cables.

  • Video transmission and power control with one coaxial cable.

  • Front panel LED for camera status indication.

  • Equipped with 2GB DDR3 memory as image buffer.

  • Video input control via encoder signal input (RS-422).

  • Universal input/output ports (TTL or open collector) for interfacing with external devices.

  • PCI Express 3.0 (Gen3) 8GT/s ×4, average data transfer rate of 3.2GByte/s with DMA.

Model name APX-3664G3A-FL
Interface CoaXPress Rev1.1
CXP-6 Quad (25Gbit/s) x1 ※ 1 x camera
CXP-6 Dual (12.5Gbit/s) x2 ※ 1 ~ 2 Camera connectable ※Asynchronous mode available
CXP-6 Single (6.25Gbit/s) x2 ※Asynchronous mode available
DIN 1.0 / 2.3 x4 (Spaced at 9mm intervals)
Image input data 8,10,12bit mono / RGB
Camera power Power Over CoaXPress : + 24V (13W) x4
※ +24V provided from the board
Memory DDR3 SO-DIMM 2GB
Encoder RS-422 (line driver) phase A, B, Z 1MHz (MAX)32bit counter
Equipped with a pair of 32-bit and 16-bit comparison registers
(comparison register matches with image input trigger)
GP I/O SDR connector
GP Input: 8ch (TTL / open collector exposure control · sync input)
GP Output: 4ch (TTL / Open Collector Flash User Output Compatible)
RS-422 Input : 4ch (3ch Compatible for Shaft Encoder Input)
Event Start image acquisition, DMA end, GPIN, FIFOC, etc.,
FPGA Temperature Monitoring supported
System BUS PCI Express3.0 (Gen3)×4 8.0GT/s
Power + 12V ± 8 % (including external + 12V connector)
Operation environment Temp. : 0 ℃ ~ 50 ℃, Humidity : 30 ~ 85 % (Non-condensing)
Dimension 190.00mm × 111.15mm Panel width : 20mm
OS Windows 10 64bit
Software (Option) SDK-TransFlyer / SDK-AcapLib2

Remark)
– Specification and dimension are subject to change without prior notice.
– Power is not including inrush current.
– For correct product usage, please read the user manual carefully before use and ensure the product is used within the warranty scope.