CXP Single 1ch camera connectable, Low Profile Frame Grabber
- Cost effective model of CXP-6 Single connection
- Transfer video, control power supply with one small coaxial cable
- Check the camera status with the front panel LED
- 1 GB of DDR 3 memory for image transmission
- Image input control by encoder signal nal input (RS-422)
- External trigger available for acquisition control/encoder operation
- GPIO(TTL or Open Collector) for use of external device
- PCIE 2.0(5.0GT/s) x4, DMA transfer speed 1.6GB/s (Max.)
- Compatible with RoHS
|System bus||PCI Express 2.0 (Gen 2) 5.0 GT / s x 4
DMA transfer capacity 1.6 GB / s
|Image input I / F||CoaXPress Rev 1.1
CXP-6 (6.25 Gbps) Single x 1 channel
PoCXP + 24V (17W) x 1ch
|Power Over CoaXPress||Generate +24 V from the external input + 12 V inside the board|
|memory||DDR 3-450 MHz 1 GB
Two 256 M x 16 bit packaged products mounted
|General purpose I / O||External trigger / general-purpose input / encoder (RS 422)
+ 5V-TTL, Photo coupler (+ 24V withstand voltage) x 1ch each,
RS422 x 3ch
Strobe / General purpose output
+ 5V – TTL (open collector), 1 photo coupler each (+24 V withstand voltage)
|interrupt||Image input start, DMA end, GPIN etc.|
|Power supply||+ 12 V ± 8% * Using external + 12 V connector (for PoCX)|
|usage environment||Temperature: 0 ℃ ~ 50 ℃, Humidity: 35 ~ 80% (no condensation)|
|External dimensions||Low Profile Half Size Length (168 mm x 69 mm) / Panel width 20 mm|
|Supported OS||Windows 10/7 (32bit/64bit)|
|Software (option)||SDK-TransFlyer / SDK-AcapLib2|
* 1: 1 GByte = 1,073, 741, 248 Byte (1024 x 1024 x 1024)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.
※ This product cannot be recognized correctly by some Workstation (PC) equipped with Xeon E5 V3 series processor.
※ For details please contact sales department: email@example.com.