Express Converter

Hi-Speed Digitizer (DAQ) Series

APX-5200B-12020-01-09T21:18:49+00:00

APX-5200B-1
12Bit/1GSps 2Ch(Sync) hi-speed sampling Digitizer

  • High speed ADC with 12 bit / 1 GSps sampling
  • A single end input of ± 0.5 V is connected to 2 ch
  • 2ch synchronous sampling
  • Compatible with 2GSps, 12bit, 1Ch interleave mode
  • 2Ch analog output (Arbitrary no. of point with PC memory)
  • External trigger input · External clock input for each 1 channel
  • General purpose DI · DO for each 4 ch
  • DDR3-SDRAM (8GByte) is installed as FIFO Memory
  • Customization of FPGA processing available
  • PCI Express 2.0 (Gen 2) 5.0 GT / s × 8 compatible
Model APX-5200B-1
Input channel Single end 2 ch (interleaved: single end 1 ch)
resolution 12bit
Sampling clock Frequency range: 150 MSps to 1 GSps (interleave: 2 GSps)
Frequency Resolution: Individual (* 1, * 2)
Sampling time 1 ns (min) (at interleave: 0.5 ns (min))
Number of samples 2 G words / 2 ch, 4 G words / 1 ch
Input range ±0.5V
Input impedance 50Ω
Analog band 900MHz(-3dB)
Input connector SMA connector
Trigger External trigger / analog trigger / soft trigger
External clock Input (when PPL is used): 5 MHz to 100 MHz
Input (direct input): 500 MHz to 1000 MHz
External trigger Input: LVTTL edge detection (invertible)
SNR 59.41dB
SINAD 59.17dB
ENOB 9.53bit
SFDR 72.18dB
memory DDR3 – SDRAM (8 GB)
FPGA 5 SGXMA 3 K 1 F 40 C 2 N (manufactured by ALTERA)
Trigger type: Internal trigger (analog trigger), external trigger, soft trigger Analog
trigger: edge · pulse trigger position: pre / post delay
General purpose AO Number of outputs: 2 ch
Resolution: 16 bits
Output range: -4 V to +4 V
System bus PCI Express 2.0 (Gen 2) 5.0 GT / s × 8
Power supply + 12 V / 3.3 A (39.6 W)
Operating environment Temperature 0 to 45 ° C, humidity 35% to 85% (no condensation)
Size 212.5 mm × 111.15 mm, panel width 20 mm (not including projections)
weight
Supported OS Windows 7/8/10 compatible with 32 bit / 64 bit each
Software development kit Windows: AWP-ADCSDK2-01
Linux: ALP-5200-01
Evaluation tool AWP-ADCTOOL-01
LabView VI Sample AWP-ADCLV-01
Environmental response RoHS
* 1: On board, default clock is set as 25MHz
* 2: There is a limit to the sample rate that can be set※ This product cannot be recognized correctly by some Workstation (PC) equipped with Xeon E5 V3 series processor.
※ For details please contact us: sales@aval-global.comNotes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.

1) Medical Equipment

2) Measurement Equipment

3) 3D Measuring Intrusment

4) Big Data Log System

5) Measurement Equipment

Express Converter series software tool
– AWP-ADCTOOL-01: Evaluation tool for A / D
– AWP-ADCLV-01: VI library for A / D LabVIEW
For FPX customization of APX – 5200 please, contact US.