APX-AA10L1
PCI Express Compatible FPGA accelerator Board

  • Arria10 GX with 1152 pin package
  • Two optical modules of 40 Gbps are installed to realize high-speed data communication
  • Two systems of DDR4 SDRAM memory (72 bits with ECC) as the shared memory
  • FPGA heat sink with fan for air cooling is installed
  • Low profile size that can be incorporated into Rack mountable equipment
  • PCI-Express 3.0 Gen 3 (8 Gbps) × 8 lane supported
Model APX-AA10L1-XX
FPGA FPGA Arria 10 series (Intel) × 1
Serial ROM Serial ROM EPCQL 1024 × 1 piece
Local memory DDR4 SDRAM 4 GByte (Separately for ECC use) 1200 MHz (DDR 4 – 2400)
DDR4 SDRAM 4 GByte (Separately for ECC use) 1200 MHz (DDR 4 – 2400)
EEPROM M24C02 – RDW6TP (can be used arbitrarily)
communication Optical communication 40 Gbps QSFP + optical module (AVAGO) × 2 ch
External bus PCI Express PCI Express 3.0 (Gen3) 8GT / S × 8
System monitoring Voltage monitoring + 12V power supply voltage monitoring, reset signal generation
Temperature monitoring Temperature sensor
Power supply Voltage: +12 V ± 10%
Current: 5.5 A (1.1 A × 5 pins from the PCI standard)
External dimensions (substrate) PCI-Express LowProfile
usage environment Temperature: 0 ° C to + 40 ° C (FPGA forced air cooling)
Humidity: 30% to 90% (non-condensing)
Environmental response RoHS
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.

Device migration is possible with 1152 pin package installed FPGA Arria 10 series.
It is an FPGA accelerator board that can incorporate functions tailored to the customer’s purpose.