APX-36124
CXP-12 Quad 1Ch , Dual 2Ch, Single 4Ch compatible frame grabber.

  • Supports CXP-12 Quad, High-speed image transfer with Po CXP 4ch. (max 50Gbit/s)

  • Image transfer, control and power delivery with 1 coaxial cable

  • Camera status check by LED on the panel side

  • DDR4-SDRAM 2GB as a buffer memory

  • Image input control by encoder signal input

  • Image Input control/ External trigger for Encoder control

  • GPIO for external devices

  • High speed image capture via PCI Express 3.0(Gen3) 8GT/s x8

Model APX-36124
Image Input I/F CoaXPress Rev2.0
CXP-12 Quad（50Gbit/s）×1 camera connected
CXP-12 Dual（25Gbit/s）×2cameras connected(asynchronous)
CXP-12 Single（12.5Gbit/s）×4 cameras connected(asynchronous)
Micro-BNC Connector
Image Input Date 8, 10, 12bit Mono / RGB Color
Camera power output Power Over CoaXPress : + 24V (13W) x4
+24V generated inside board
Memory DDR4 SDRAM 2GB
Standard I / O (Front Panel) D-sub 15pin connector
GP Input-Photocoupler: 4ch TTL:1ch
GP Output-Photocoupler: 4ch TTL:1ch
Standard I / O (On Board) Box header 26 pin connector
GP Input-Photocoupler: 4ch TTL:4ch
GP Output-Photocouple:4ch
RS-422 input : 4ch
Interrupt DMA, FIFOC, Image Input start, Finish, CXP, GPIN etc
FPGA temperature monitoring function Support
System bus PCI-Express3.0(Gen3) 8.0GT/s x8
Power +12V ± 8 % (PCI-Express connector)
+12V±8%(For PoCXP：External power connector'(6pin)
Environment Operating temperature： 0℃ 〜 50℃, Operating humidity ： 35% 〜 80% (Non-condensing)
Dimension 167.65mm × 111.15mm, Panel 20mm(Excluding the connector part)
Compatible OS Windows
Software(Option) SDK-TransFlyer
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.

CXP-12 Single x 4 cameras / CXP-12 Dual x 2 cameras / CXP-12 Quad x 1 camera