ENG
KOR
CHN
JPN
APX-3326A
Camera Link Base/Medium/Full/Deca 2Ch Frame Grabber
| Model | APX-3326A |
| Image input I/F | Camera Link Base / Medium / Full / Deca Configuration 2 ch Four SDR 26 pin connectors installed Area, line camera compatible Sampling clock: 85MHz Image data RGB color: 24 bit / 30 bit Monochrome: 8 bit (1 to 10 tap), 10bit (1 to 4 tap), 12bit(1 to 4 tap) |
| PoCL | Supported (Safe Power is not supported) |
| MEGA-FIFO | DDR2-SDRAM 512MB |
| Image processing | Tap arrangement + Line reverse |
| Sync output | Camera control signals: CC1 to CC4 General-purpose output: 8ch, Strobe: 2ch (TTL / Open collector) |
| Sync input | External trigger: TTL / Open collector / RS-442 Encoder: differential signal RS-422 (line driver), A / B / Z phase, 1 MHz (MAX) General purpose input: 2 ch (Photo coupler) |
| Interrupt | Image acquisition start, DMA end, GPIN etc. |
| System Bus | PCI Express 2.0 × 4 (5.0GT / s) |
| Power | +12V |
| Environment | Operating temperature: 0 to 50 ° C, Operating humidity: 35% to 85% (Non-condensation) |
| Dimension | 167.65 mm x 111.15 mm, Panel depth: 20 mm (Excluding the connector part) |
| Compatible OS | Windows 7 / 10 (32bit/64bit), Linux |
| Software (option) | SDK – AcapLib2 |
| Compliance | RoHS |
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.
Since this product has 4ch SDR connector in the single slot of the PCIe board, it may interfere with the chassis, and some PC products may not be able to connect. Also, because the pitch between connectors is narrowed, the connection may not be possible depending on the cable. For details on this matter, please contact our sales department.
