APX-3324A
Camera Link Base x 4Ch Frame Grabber

  • Up to 4 Camera Link Base Cameras connectable

  • Synchronous / asynchronous capture selectable

  • 512Mbyte onboard buffer memory

  • PCI Express 2.0 × 4 (5.0 GT/s)

Model APX-3324A
Image input  I/F Camera Link Base Configuration 4 ch
Four SDR 26 pin connectors
Area and line camera compatible
Sampling clock 85 MHz
Image data RGB color: 24 bits
Monochrome: 8 bits (1 to 3 tap) / 10 to 12 bits (1 to 2 tap)
PoCL Supported (Safe Power is not supported)
MEGA-FIFO DDR2-SDRAM 512MB
Image processing Tap arrangement + Line reverse
Sync output Camera control signals: CC1 to CC4
General-purpose output: 8ch, Strobe: 4ch (TTL / Open collector)
Sync input External trigger: TTL / Open collector / differential signal RS-442
Encoder: RS-422 (line driver), A / B / Z phase, 1 MHz (MAX)
General purpose input: 4 ch (Photo coupler)
Interrupt Image acquisition start, DMA end, GPIN etc.
System Bus PCI Express 2.0 × 4 (5.0GT / s)
Power +12V
Environment Operating temperature: 0 to 50 ° C, Operating humidity: 35% to 85% (no condensation)
Dimension 167.65mm x 111.15mm Panel depth 20mm (Excluding the connector part)
Compatible OS Windows 7 / 10 (32bit/64bit), Linux
Software (option) SDK – AcapLib2
Compliance RoHS
Notes)
-The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty
* Note
Since this product has 4ch SDR connector in the single slot of the PCIe board, it may interfere with the chassis, and some PC products may not be able to connect. Also, because the pitch between connectors is narrowed, the connection may not be possible depending on the cable. For details on this matter, please contact our sales department.