APX-3323
CL/Base/Medium/Full/Deca x 1ch Frame Grabber

  • Connect one Camera Link Base / Medium / Full / Deca Configuration camera
  • Compatible with PoCL
  • Large capacity onboard buffer with a memory of 256M Byte
  • General purpose I/O ports for external triggers and encoders
  • Compatible with PCI-Express 2.0 × 4
모델명 APX-3323 / APX-3323-1
Image input I / F Camera Link Base / Medium / Full / Deca Configuration 1ch
Two SDR 26 pin connectors installed
Sampling clock 85 MHz (MAX)
Area, line camera compatible
PoCL Correspondence
MEGA-FIFO DDR2-SDRAM 256MB
Image processing Tap Sort + Line Inversion
Sync output Camera control signals: CC1 to CC4
General purpose output: 2 ch asynchronous, TTL / open collector
(Available with the strobe timing output)
Sync input External trigger: TTL / open collector / differential signal RS-422
Encoder: differential signal RS-422 (line driver), A / B / Z phase,
1 MHz (MAX)
General purpose input: TTL / open collector
System bus PCI Express 2.0 x 4 (Gen 2) 2.5 GT / S | PCI Express 2.0 x4 (Gen2) 5.0GT / S
Power + 12V
Environment 0 ℃ to 50 ℃, humidity: 35% to 85% (no condensation)
Dimension 167.65 mm x 111.15 mm, panel width 20 mm (without projections)
Supported OS Windows 10 / 7 compatible with 32 bit / 64 bit, Linux
Software (option) Development kit: SDK-AcapLib 2
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty