APX-3323MDR
CL Base/ Medium/ Full x 1Ch Frame Grabber

  • Connect 1 x Camera Link Base / Medium / Full camera

  • Compatible with PoCL

  • Large capacity onboard memory of 256 MByte

  • General purpose I/O ports for external triggers and encoders
  • Compatible with PCI-Express 2.0 × 4
Model APX-3323MDR
Image input I / F Camera Link Base/Medium/Full x 1Ch with MDR 26pin Connector
Sampling clock 85 MHz (MAX)
Area, line camera compatible
PoCL Correspondence
MEGA-FIFO DDR2-SDRAM 256MB
Image processing Tap Sort + Line Inversion
Sync output Camera control signals: CC1 to CC4
General purpose output: 3ch asynchronous, TTL / open collector
(Available with the strobe timing output)
Sync input External trigger: TTL / open collector / differential signal RS-422
Encoder: differential signal RS-422 (line driver), A / B / Z phase,
1 MHz (MAX)
General purpose input: TTL / open collector
Event Image input start, DMA end, GPIN etc.
System bus PCI Express 2.0 x4 (Gen2) 2.5GT / S
Power + 12V
Environment 0 ℃ to 50 ℃, humidity: 35% to 85% (no condensation)
Dimension 168 mm × 112 mm Panel width 20 mm (excluding projections)
Supported OS Windows 10 / 7 compatible with 32 bit / 64 bit, Linux
Software (option) SDK-AcapLib2
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty