APX-3800

APX-3800
Optical communication interface Opt-C:Link 2Ch frame grabber

Data transmission by 6.25 Gbps × 2 ch optical communication
By optical communication transmission, it is resistant to noise, and extension of several hundred meters is possible
Control system signals and image data are realized by optical communication, contributing to saving the power wiring
Software: Provide dedicated SDK (AcapLibPlus)

Specifications

Model		APX-3800
Supported camera		Opt-C: Link (Please refer to the ‘Info Center’ for the list of supported cameras)
Image input I/F[Optical I/F]	Number of channels	2ch
	Transmission speed	6.25Gbps
	Transmission mode	MultiMode
	Laser type	850nm VCSEL
	Maximum node distance	150 m (Maximum distance varies with cable specification.)
	Laser safety standard	Class 1
	Connector shape	LC connector
	Cable specification	Core diameter 50 μm / 62.5 μm, clad diameter 125 μm
	Communication protocol	Opt-C: Link (protocol, use only for Aval data)
MEGA-FIFO		DDR2-SDRAM 256MB
Image processing		Tap Sort + Line Inversion
I / O		APX-3312 compatible: 26 pin connector
Event		Image input start, DMA end, GPIN etc.
System bus		PCI Express 2.0 x8 (Gen2) 2.5GT/s
Current consumption		+ 12V, 1.0A
usage environment		temperature: 0 ℃ to 50 ℃, humidity: 35% to 85% (no condensation)
External dimensions		LowProfile 167.65 mm × 68.9 mm Panel width 20 mm (not including protrusions)
Environmental response		RoHS compliant
Supported OS		Windows XP / 7 compatible with 32 bit / 64 bit
Software (option)		Software development kit: AcapLibPlus

Notes)
– The specifications and appearance stated are subject to change without notice.
– The current consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. In addition, use the product under conditions applicable to the product warranty.