APX-5200B-1

APX-5200B-1
12Bit/1GSps 2Ch(Sync) hi-speed sampling Digitizer

High speed ADC with 12 bit / 1 GSps sampling
A single end input of ± 0.5 V is connected to 2 ch
2ch synchronous sampling
Compatible with 2GSps, 12bit, 1Ch interleave mode
2Ch analog output (Arbitrary no. of point with PC memory)
External trigger input · External clock input for each 1 channel
General purpose DI · DO for each 4 ch
DDR3-SDRAM (8GByte) is installed as FIFO Memory
Customization of FPGA processing available
PCI Express 2.0 (Gen 2) 5.0 GT / s × 8 compatible

Specifications

Model	APX-5200B-1
Input channel	Single end 2 ch (interleaved: single end 1 ch)
resolution	12bit
Sampling clock	Frequency range: 150 MSps to 1 GSps (interleave: 2 GSps) Frequency Resolution: Individual (* 1, * 2)
Sampling time	1 ns (min) (at interleave: 0.5 ns (min))
Number of samples	2 G words / 2 ch, 4 G words / 1 ch
Input range	±0.5V
Input impedance	50Ω
Analog band	900MHz(-3dB)
Input connector	SMA connector
Trigger	External trigger / analog trigger / soft trigger
External clock	Input (when PPL is used): 5 MHz to 100 MHz Input (direct input): 500 MHz to 1000 MHz
External trigger	Input: LVTTL edge detection (invertible)
SNR	59.41dB
SINAD	59.17dB
ENOB	9.53bit
SFDR	72.18dB
memory	DDR3 – SDRAM (8 GB)
FPGA	5 SGXMA 3 K 1 F 40 C 2 N (manufactured by ALTERA) Trigger type: Internal trigger (analog trigger), external trigger, soft trigger Analog trigger: edge · pulse trigger position: pre / post delay
General purpose AO	Number of outputs: 2 ch Resolution: 16 bits Output range: -4 V to +4 V
System bus	PCI Express 2.0 (Gen 2) 5.0 GT / s × 8
Power supply	+ 12 V / 3.3 A (39.6 W)
Operating environment	Temperature 0 to 45 ° C, humidity 35% to 85% (no condensation)
Size	212.5 mm × 111.15 mm, panel width 20 mm (not including projections)
weight
Supported OS	Windows 7/8/10 compatible with 32 bit / 64 bit each
Software development kit	Windows: AWP-ADCSDK2-01 Linux: ALP-5200-01
Evaluation tool	AWP-ADCTOOL-01
LabView VI Sample	AWP-ADCLV-01
Environmental response	RoHS

* 1: On board, default clock is set as 25MHz
* 2: There is a limit to the sample rate that can be set※ This product cannot be recognized correctly by some Workstation (PC) equipped with Xeon E5 V3 series processor.
※ For details please contact us: sales@aval-global.comNotes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.