FRAME GRABBER

Leading Company in the industrial Embedded Company market

APX-3664G32019-03-05T00:37:35+00:00

Frame Grabber

CoaXPress

APX-3664G3
1 CXP-6 Quad camera & 2 Dual/Single Cameras Connectable Frame Grabber

  • Camera input CXP-6 Quad response, up to 25 Gbit/s high speed transmission with four coaxial cables
  • Transfer video, and control the power supply with one coaxial cable
  • Check the status of the camera with the front panel LED
  • 2 GB of DDR3 memory as image buffer
  • Enables image input control by encoder signal input (RS – 422)
  • Equipped general purpose input / output pin (TTL or open collector) for I / F with external equipment
  • PCI Express 3.0 (Gen 3) 8 GT / S × 4, and when transferring to the PC at high speed with DMA, can transfer with 3.2 GByte / sec (average)
Model APX-3664G3
Image input I / F Coaxpress Rev 1.1
CXP – 6 Quad (25 Gbit / s) x 1 * 1 Camera connection
CXP-6 Dual (12.5 Gbit / s) x 2 * 1 to 2 camera connection
* Asynchronous Yes
CXP-6 Single (6.25 Gbit / s) x 2 * 1 to 2 camera connections
* Asynchronous Yes
Four DIN 1.0 / 2.3 installed (arranged at 9 mm intervals)
Image input data 8, 10, 12 bit monochrome / RGB
Camera power output Power Over Coaxpress: +24 V (13 W) x 4
Memory DDR3 SO-DIMM 2GB
Encoder RS-422 (line driver)
A phase, B phase, Z phase 1 MHz (MAX)
32 bit counter and 32 bit / 16 bit compare register, one pair each installed
(Image input trigger with comparison register match)
General purpose I / O SDR connector General-purpose input: 8 ch (TTL / open collector,
dual exposure control / synchronous input)
General purpose output: 4 ch
(TTL / open collector, combined with strobe / user output)
RS-422 input: 4 ch
(Shaft encoder input for 3 ch as well)
interrupt Image input start, DMA end, GPIN etc.
FPGA temperature monitoring Present
System bus PCI Express3.0 (Gen3)×4 8.0GT/s
Power supply + 12V ± 8% (With external + 12V connector)
usage environment Temperature: 0 ℃ ~ 50 ℃, Humidity: 30 ~ 85% (no condensation)
External dimensions 190.00 mm × 111.15 mm, panel width 20 mm
Supported OS Windows 10/7 (32bit/64bit)
Software (option) SDK-TransFlyer / SDK-AcapLib2
Notes)
– The specifications and appearance stated are subject to change without notice.
– Power consumption does not include inrush current.
– In order to use the product correctly, be sure to read the instruction manual before using the product. Also, use the product under the conditions applicable to your product warranty.